Beam Apparatus Manufacturer,Supplier and Exporter in Kenya

Beam Apparatus

Product Code : LSK-MTE-10510
Lss Kenya is a leading Beam Apparatus Manufacturer,and suppliers in India, Beam Apparatus Manufacturer,and suppliers in South Africa.Beam Apparatus Suppliers in Mozambique,Beam Apparatus in Supplier Kenya, Argentina (Buenos Aires), Australia (Canberra), Austria (Vienna), Bolivia (Sucre), Botswana (Gaborone), Brazil (Brasília), Brunei (Bandar Seri Begawan), Bulgaria (Sofia), Burkina Faso (Ouagadougou), Burundi (Gitega), Cape Verde (Praia), Central African Republic (Bangui), Chad (N'Djamena), Chile (Santiago), Colombia (Bogota), Comoros (Moroni), Congo (Kinshasa), Costa Rica (San José), Croatia (Zagreb) nda, Seychelles, Tanzania and Uganda.

The Beam Apparatus allows an extensive range of experiments to cover virtually all course requirements relating to bending of beams. 
The basic unit provides facilities for supporting beams on simple, built-in and sinking supports, applying point loads, and measuring support reactions and beam deflections. 
The Beam Apparatus can be used for an almost limitless number of experiments ranging from determination of the elastic modulus for beams of different materials, through to studies of continuous beams with any loading. Great care has been taken at the design stage to ensure maximum flexibility and ease of use.
It includes five different test beams. A pack of ten additional specimen beams is available for further experiments.
The main frame of the apparatus consists of an upper cross-member carrying graduated scales and two lower members bolted to T-legs to form a rigid assembly. The three load cells and cantilever-support pillar slide along the lower members and can be clamped firmly in any position. The load cells have direct digital readout and each is fitted with a hardened steel knife edge which can be adjusted to set the initial level or to simulate a sinking support. Locking pins can convert each load cell to a rigid support when required.
The standard test beams are in three thicknesses and include three different materials. They are suitable for the complete range of experiments covering different loading and support configurations. 
The optional set of beams provide for experiments on different types of beam including compound, channel and non-uniform beams of various materials.
The cantilever support is a rigid pillar with a sturdy clamping arrangement to hold the beams when built-in end conditions are required. Four weight hangers and a set of weights are supplied to apply static loads. 
Three digital indicators measure all beam deflections. The indicators mount on magnetic carriers that slide along the upper cross-member. The indicators, carriers, load cells and weight hangers all have cursors that register on the scale (located on the upper cross-member) to ensure easy, accurate positioning. 
All digital indicators and load cells have sockets and cables for connection to lsskenya optional Versatile Data Acquisition System.

   

Office Address

Lss Kenya

Works: Kirinyaga Rd, Nairobi, Kenya

[email protected]

+254 733 917892

!-->